This is my audio setup for Youtube and video production. It is a single wireless stand that doubles as a boom setup for shotgun microphones! The video below walks through all the parts used to build this all in one audio rig.
My goal for this setup was to have a single rolling stand that held everything I needed to get great sound. With this setup I have a shotgun microphone, wireless audio recorder and headphones always at the ready. No more fussing with stands and boom arms!
Gear Used
- Impact Rolling Stand
- Rapid Baby Adapter
- Rode PSA1 Microphone Arm
- Deity S-Mic 2
- Sound Devices MixPre-3 Audio Recorder
- Cheese Plate for MixPre
- Friction Arm and Clamp
- USB Battery
- USB-C Cable
- XLR Cable for Shotgun Mic
- Sand Bag
AFFORDABLE OPTIONS:
If the above audio kit is too expensive, here are some more budget friendly options I mentioned in the video.
- $50 Stand
- $50 Microphone Arm
- 5/8 Adapter for arm
I didn’t mention this, but you will need an adapter for the more affordable mic arm. - Deity D3 Pro Mic Kit
- Rode VideoMicro
- 3.5mm Cable
- Zoom H1n Recorder
You could use any recorder, but this one is probably the best option for around $100
DISCLAIMERS:
Some of these links have an affiliate code, if you purchase gear with these links I will receive a small commission at no additional cost to you. Thank you!
This video was not paid for by outside persons or manufacturers.
No gear was supplied to me for this video.
The content of this video and my opinions were not reviewed or paid for by any outside persons.